7 Easy Ways to Keep Mattress Topper from Sliding

Mattress toppers are essential items that can help you achieve the perfect softness of firmness on your mattress rather than purchasing a new mattress, which can be costly. However, one problem with mattress toppers is they cannot stay in place.

Most users complain about their mattress toppers slipping to either end of the bed while sleeping or moving to sideways as they get in and out of bed.

Keep Mattress Topper from Sliding

This can be really irritating to a point where you consider eliminating them because fixing them to stay properly on the mattress can be time-consuming since you have to undo the entire bed.

Fortunately, some useful tips can help keep the mattress topper from slipping and avoid all the work of waking up to adjust the mattress topper.

How to Keep Mattress Topper From Sliding?

You can try any of the following tips to see which will work best for you:

1. Non-Skid Mats

The non-skid mats placed under your area rugs or in the shower prevent sliding while showering, is the best way to keep your mattress topper from slipping. Most individuals who use non-skid mats say that they function so well and they are simple to fix as there isn’t much work involved.

They specifically perform well when used on memory foam or a latex mattress. All you do is slide the non-skid mats between the mattress and the mattress topper, and you will have solved this irritating problem.

2. Sheet suspenders/straps

Use of sheet suspenders is another excellent way of keeping your mattress topper from sliding as they give it no room to move. Some individuals try to keep the topper from sliding by using tight-fitted sheets, however this only works for a while, and after some time, the topper starts slipping especially if you keep moving in your bed. With sheet suspenders or straps you can keep the sheets in one place and also the mattress topper remains fixed.

However, you have to ensure that the sheet suspenders are fixed tight enough. Most individuals refer to them as the suspender-type thingies, but when it comes to holding the mattress toppers, they are the best.

3. Duct tape

If you ever used duct tape before then, you know that it can hold almost anything together. For this case, duct tape might not be the best option, but it does what it does best, keeping the mattress pad from sliding. For best results, tape all the four corners, or the edges of the topper to the mattress then use a tightly fixed sheet as well.

You can also use a spray adhesive that is available at the craft and photo stores if you think it’s easier to use. However, only use spray adhesive if the mattress is yours because it leaves some marks on the mattress once you remove the mattress topper.

4. Cotton or cotton/poly blend pad

Most often the mattress toppers slip off the mattress because the mattress surfaces are too slippery. Hence, adding a cotton pad or cotton and poly blend pad on the mattress to make sure that the topper is not next to the slippery surface of the mattress can help.

Otherwise, put a tightly fitted sheet on the mattress then place the mattress topper and another fitted sheet after the topper. This ensures that the topper is not in direct contact with the slippery surface of the mattress and the top fitted cotton sheet secures the topper more to the mattress.

5. Adhesive Velcro tape/strips

Well, if you are a do-it-yourself person, this is a task that may excite you. If you have been looking for a way to keep your mattress topper from sliding, Velcro might be the answer. First, attach Velcro on your mattress topper where the parallel side faces the bed. Again, ensure that the sharp side of the Velcro matches the soft side when positioning the topper on the bed.

Alternatively, attach the Velcro to the four corners of your bed and go around the pad and the mattress, just as you would with bed garters.

The main benefit of using Velcro is that it secures the topper much better than other materials and it will not loosen up fast. Some individuals also use carpet tapes too, and they say they work perfectly so feel free to try any tapes that you have.

6. Footboard

Adding a footboard on your bed can help in keeping the mattress topper from slipping. However, for the footboard to work, it has to be long enough, and the mattress topper should touch both sides of the headboard and the footboard.

Also, Read – Fix a Sagging Mattress with Plywood

Some individuals do not like the idea of having a footboard; you could, therefore, use any of the other ways listed. One downside of the footboard is that it might not help with the side to side sliding as you get in and out of bed.

7. Use Safety Pins

This sounds like a dangerous idea but most people have used it, and it works. And, the pins do not tatter the mattress topper or shred your mattress. Though, you have to fix the pins correctly for your topper to stay in place without causing any harm.

Foremost, you have to use several pins, almost five on each side, to balance the pressure. And, if your bed is large, you should use more than five safety pins on each side and use the largest ones. The advantage of this method is that it is the cheapest method of keeping your mattress topper from slipping, and it is time-saving.


With these helpful tips, you can now prevent your mattress topper or mattress pad from slipping, and you will also enjoy a restful sleep with no interruptions in the middle of the night. There are also some mattress toppers that come with their own straps to help keep them secure on the mattress, so if you are shopping for another topper in the future, you can look for one.

Leave a Comment